Skip to main content
Bona Support

How to assemble the Bona Hardwood Floor Mop and Bona Stone Tile and Laminate Mop?

Overview

How to assemble the Bona Hardwood Floor Mop and Bona Stone Tile and Laminate Mop

Resolution

We recommend watching our short Mop Assembly Video. The Bona Hardwood / Stone Tile and Laminate Floor Mop is very easy to put together. The one key step is to ensure the green locking ring is NOT engaged prior to putting the upper and lower assembly together. Push the green locking sleeve down near the cartridge receiver cup prior to connecting lower and upper assembly. Slide upper and lower pieces together following the channel groove and then slide the green locking sleeve up flush with the bottom of the top handle piece.

Proper care and maintenance of your hardwood floors require the proper tools. The Bona Hardwood / Stone Tile and Laminate Floor Mop offers you an easy way to clean and protect your floors. Click on the video to learn how to put together your Bona Hardwood / Stone Tile and Laminate Floor Mop.

Assembly of your Bona Hardwood / Stone Tile and Laminate Floor Mop is quick, easy and will get you cleaning in no time!

 

Assembly Preparation

1. Open Bona Hardwood / Stone Tile and Laminate Floor Mop box. Remove contents.
2. Lay out all parts of the Bona Hardwood / Stone Tile and Laminate Floor Mop on the floor or other flat surface for easy access to parts.

 

Assembling Bona Hardwood / Stone Tile and Laminate Floor Mop Pole

3. Connect handle and lower pole.
    a. Align guide on lower pole with channel on upper handle.
    b. Slide both pieces together until they snap in place.
    c. Slide green collar into the handle to align and complete pole assembly.


Attaching Bona Hardwood / Stone Tile and Laminate Floor Mop Pole to Mop Base.

    a. Align channel with mop base
    b. Rotate until silver button snaps in place.

Attaching Bona Hardwood / Stone Tile and Laminate Floor Mop Cleaning Pad

5. Attach cleaning pad.
    a. Lay pad on floor, blue side down.
    b. Place mop base firmly on top of pad. Pad will attach to mop base with Velcro.


Installing Bona Hardwood / Stone Tile and Laminate Floor Mop Cleaner Cartridge

6. Install cartridge.
    a. Remove blue cap from cartridge.
    b. Push cartridge down into the mop until it clicks into place.
    c.  Pull mop trigger 3-4 times to fill reservoir.
    d. Cleaner will dispense when reservoir is full.

 

Clean and protect your floors with your Bona Hardwood / Stone Tile and Laminate Floor Mop!

  • Was this article helpful?