How do I polish my floors?
How to Polish:
Remove furniture, rugs, etc. and vacuum, sweep or dust mop the floor.
-Attach the yellow Applicator pad to the bottom of your mop base.
-Gently rock the Polish bottle back and forth for 30 seconds.
-It is very important to measure your floor before applying the polish.
-Do a small test area first before applying the Polish throughout your floor.
-One bottle of the 32oz. Polish only covers 500 sq. ft., 24 oz. Polish covers only 350 sq. ft.
-If you have a 10X12 room you will use about 1/4 of the 32 oz. bottle.
-Start in a small manageable area and squirt the polish from the bottle directly onto the floor and apply the polish using the Applicator Pad.
-Spread the Polish with the grain of the wood.
-After applyigng the Polish, wash out your Applicator Pad immediately to remove polish residue.
-After 1 to 2 hours, depending on humidity, you may walk on the floor in your stocking feet.
-The polish is fully cured in 24 hours so after this time it is safe to replace furniture, allow heavy traffic and allow pets.